Channel Plus & Open House Intergrated Home Network Products

	DA-500A The DA-500A amplifier with 18 dB of gain, is ideal for residential cable systems or as an antenna pre-amplifier. The DA-500A offers a more robust power supply and greater EMI rejection. Now including grid mounting ears for the 2619. The DA-500A if fully compatible with HDTV Television signals.	$90.00 Order Now
	DA-506BID The DA-506BID RF distribution panel creates an ideal entry-level product for broadband distribution. Encased in an extruded aluminum shell, the DA-506BID meets the needs of small distribution systems, which do not require IR control or modulator inputs. The DA-506BID has one input for CATV or off-air antenna and six outputs to television. Four outputs are for televisions up to 75’ away and 2 outputs can be used up to 150’ away. The DA-506BID has bi-directional capabilities, using a 5-42 MHz return path on the ant/CATV input. This allows compatibility with interactive CATV set top boxes. Grid mount ears now included for mounting in the 2619.	Pricing Information
	DA-520A The model DA-520A is a bi-directional amplifier with a 5-40 MHz return path. The DA-520A provides 20 dB of gain to be used with 3025XA or in a CATV or antenna system. A 12 VAC power supply is included.	Pricing Information
	HIGH HEADROOM VIDEO DISTRIBUTION AMPLIFIERS WITH 12 VOLT IR The DA-550 series is designed with the highest headroom available in a distribution amplifier. Designed to handle HDTV, the DA-550s can handle an extremely wide range of input signals from NTSC and digital TV. The DA-550 is the heart of a multi-room distribution system with outputs to eight televisions, coax runs up to 150 feet, three inputs, one from a CATV or off-air antenna and two from modulators.	Pricing Information
	STANDARD 5 VOLT IR REMOTE CONTROL For homes with up to eight TV outlets and cable lengths up to 150 feet. The DA-8200 series provides outputs to eight televisions, three inputs from an off-air antenna or CATV and two modulator locations. The compact design feature ensures a quick installation for surface mount application or in a structured wire enclosure like the 2619.	Pricing Information
	The 5115 series is comprised of a wall plate with video inputs and a channel injector. The channel injector is weather resistant and designed to mount indoors or outdoors close to the incoming CATV or antenna feed. The system uses the existing coax cable distribution in the house and only requires a single run of Cat 5 between the wall plate and channel injector. The 5115 is a simple way to create a single in-house channel for any type of video device using the home’s own distribution.	$165.36 Order Now
	5515, 5525, 5545 modulators The new 5515, 5525 and 5545 are one, two and four channel input modulators with loop-out capabilities and integrated IR control. Each offers IR emitter output jacks and the ability to remotely power a DA-550 series or an DA-8200 series distribution panel from up to 75’ away. The 5500 series works with both the 12-volt and 5-volt IR systems and accessories.	Pricing Information
	5601 Stereo Converter for Mono Modulators With the 5601 stereo converter, any single channel of a mono modulator can be turned into stereo. By placing the 5601 between the stereo video source and the existing mono modulator the audio will be encoded into MTS stereo passing right through the modulator. Then any stereo TV can decode the signal back into stereo or Dolby Pro Logic®.	Pricing Information
	5645 four channel stereo modulator The 5645 is a four channel frequency-agile, MTS stereo modulator with loop out capabilities. The 5645 has easy to use push button programming and delivers 25 dBmV of output. It has been designed to work with both the DA-550 and DA-8200 series distribution panels. The 5645 will pass all stereo programming with dbx noise reduction and is compatible with Dolby Pro Logic®.	Pricing Information
	SVM-22 & SVM-24: S-Video Modulators The new SVM series of modulators offers complete MTS stereo encoding and S-video inputs in a full component size rack mountable case. The SVM-22 and SVM-24 are two and four channel stereo modulators with 25 dBmV of output and easy push button programming. The SVM series incorporates S-video inputs that support both S-video and composite video feeds with included adapters. Offering full MTS stereo with dbx noise reduction and Dolby Pro Logic® compatibility makes the SVMs perfect for integration into any home theater system.	Pricing Information
	3015 & 3025: All-In-One Modulators The 3000 Series Whole-House Video Distribution Systems are easy to install and operate. The 3015 is a dual input system that accepts a CATV or antenna input, audio/video signals from one video source and modulates it to a user selected channel that can be seen at four TV locations. Models 3025 and 3025XA are triple input systems that accept a CATV or antenna input, audio/video signals from two sources and modulates them to user selected channels that can be seen at up to five TV locations. The 3025XA requires external amplification with either a DA-520A bi-directional amplifier when a bi-directional cable box is in use, or with a DA-500A amplifier when an external antenna is used in an area where signal strengths vary and high headroom is needed.	3025 $188.50 Order Now 3015 $136.50 Order Now
	5555 HHR or 5555BID: RF Distribution with IR Starter Kits MULTI-ROOM RF DISTRIBUTION KIT Included in the 5555 Kits: • 4 Channels of modulation (5545) • 8 Rooms of distribution (DA-550HHR or DA-550BID) • 3 Rooms with IR interface, expandable to 8 Rooms (2100A & 2501’s) • IR control of 4 video sources (2172’s)	Pricing Information
	5557HHR and 5557BID: 5 volt All-In-Two Kit ALL-IN-TWO KIT Included in the 5557 Kits: • 2 Channels of modulation (5525) • 8 Rooms of distribution (DA-8200HHR or DA-8200BID) • 2 Rooms with IR interface, expandable to 8 Rooms (2133) • IR control of 2 video sources (2172’s)	Pricing Information
	5558HHR and 5558BID: 5 volt All-In-Two Kit The 5558 distributes 4 sources, such as DVD, surveillance camera, VCR and satellite, to 8 TVs with IR control to 3 TVs. The system can be expanded to include IR control at all 8 TVs with the purchase of additional emitters and targets. Included in the 5557 Kits: • 4 Channels of modulation (5545) • 8 Rooms of distribution (DA-8200HHR or DA-8200BID) • 3 Rooms with IR interface, expandable to 8 Rooms (2133) • IR control of 2 video sources (2172’s)	Pricing Information
	2512/2514/2532/2532/2538: Splitters & Combiners The ChannelPlus bi-directional 2-way, 4-way and 8-way splitter/combiners provide a 1 GHz bandwidth and are ideal for antenna and coaxial cable operations. The splitter/combiner is one product that can be used for two applications. It can be used to split a signal from a source or combine signals from multiple sources onto one coax run. Use DC passing splitter when using IR on the coax. The 2512 and 2514 are DC passing.	Pricing Information
	2501: Blocking Capacitor The model 2501 is used in systems where DC and/or infrared control pulses are present on the coaxial cable. When such signals are not wanted or might be shorted out by downstream video products, a model 2501 blocking cap can be inserted in an individual coaxial cable feed. The capacitor serves like an open circuit to DC and low frequency IR control signals, yet passes all RF signals on.	Pricing Information
	2503 & 2506: In-Line Attenuators ChannelPlus in-line attenuators can be inserted in coaxial cable feeds to reduce signal amplitude levels. The model 2503 provides a 3dB insertion loss, and the model 2506 provides a 6dB insertion loss. Combinations of 2503s and 2506s may be used together to create attenuators with greater insertion loss.	Pricing Information
	2507: 75 ohm TerminAtor The model 2507 terminator provides a 75 ohm load than can be used on unused splitter output ports in order to maintain uniform signal levels.	Pricing Information
	2509: 9dB Tap The model 2509 9dB tap provides a bandwidth of 1 GHz and minimal insertion loss through the tap, while allowing a signal to be tapped from the original source.	Pricing Information
	2620: 19" Modulator Rack Mount The 2620 is a one-space 19” EIA rack mount for the new 5500 series modulators.	Pricing Information
	2710: In-Line Amplifier The 2710 in-line amplifier is designed for use on coax runs exceeding 150' from a DBS satellite dish to the receiver. The amplifier is powered the voltage present o the coax. Each run of coax will require it's own 2710.	Pricing Information
	2743: Cable Set The 2743 cable set has special RCA connectors that allow another set of cables to be connected directly to the RCAs on the 2743. This allows the signals to be looped through without the use of a “Y” adapter. The 2743 is ideal for use with the 5500 series modulators.	Pricing Information
	LPF-380/ LPF-470/ LPF-600/ LPF-750: Low Pass Filters A ChannelPlus low pass filter is used on systems when broadband entertainment feed is supplied by a CATV service. The filter removes all CATV channels above the pass band, allowing insertion of locally-generated ChannelPlus modulated channels. In addition, the filter removes cable system noise which degrades the picture quality of the locally-generated channels.	Pricing Information
	NF-469: Notch Filter With a ChannelPlus NF-469 notch filter you can insert modulated channels by blocking CATV channels 64-70 and UHF 14-19. This allows you to create three modulated channels (65,67,69) on CATV and three channels (14,16,18) on UHF.	Pricing Information
	TC-200: Tilt Compensator The model TC-200 creates an attenuation loss equal and opposite to cable loss.	Pricing Information

Integrated Home Networks

RF Distribution

Call 800-525-7194

Go directly to Open House, Channel Plus catalog.